CK-2121 Continuous Wave Cavity Magnetron Advantages of Microwaves 2KW

Product Detail

Ck-2121 continuous wave cavity magnetron 5KW




Model	CK-2121
Frequency range (f)	2445±15MHz
Filament voltage when preheating	4.6V
Filament current when preheating	20A
Filament current when working	3.3V
Anodic voltage	4.0±0.2kV
Anodic current	=725mA
Output power	=2kW
Load VSWR	=2.5:1
Cooling mode	water cooling
Energy transport mode	BJ—26 waveguide output
Efficiency	=63%




Magnetron anode resonance system besides the electromagnetic oscillation can produce need, also can produce different characteristics of various electromagnetic oscillation.For the magnetron stable job on the required pattern, commonly used "type isolation belt" to isolate the interference pattern. Every type with the anode foil an interval of a connected, in order to increase working mode and the frequency interval between adjacent interference pattern.In addition, due to the energy exchange of electronic also has a certain energy, these electrons on anode plate temperature, the more electronic anode collect (that is, the greater the current), or electronic energy (energy conversion rate is lower, the greater the anode temperature is higher, therefore, the anode needs to have good capability of heat dissipation. Usually power tube using forced air cooling, anode with heat sink. High power tube is multi-purpose water cooling, cooling jacket on anode

Should you're interested in our ck-2121 continuous wave cavity magnetron advantages of microwaves 2kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.