CK619 Continuous Wave Cavity Magnetron Magnetron Generator 10KW

Product Detail

CK619 continuous wave cavity magnetron magnetron generator 10KW




Model	CK-619
Frequency range (f)	2450±50MHz
Filament voltage when preheating	8.5±0.7V
Filament current when preheating	47A
Filament current when working	36A
Anodic voltage	=10kV
Anodic current	=1.6A
Output power	=10kW
Load VSWR	=2.5:1
Cooling mode	water cooling
Energy transport mode	BJ—22 waveguide output
Efficiency	=66%




The energy output device Energy output is generated in the interaction space of microwave energy to the load to the device. The energy output device (no loss, no breakdown by microwave, ensure pipe vacuum seal, and must be connected to external systems. Coaxial output USES mostly small power continuous wave magnetron anode resonator in the high frequency magnetic field is the strongest. Place a coupling ring, when across the ring to the flux change, will produce high-frequency induced current in the ring, and the high frequency power to the outside of the ring. The stronger the coupling ring area, the greater the coupling. Commonly used high power continuous wave magnetron axial energy output, output antenna through the pole shoe hole connected to the anode on the wing. An antenna into strips or round rods can also be used for the cone. The antenna was output window seal. Output window commonly used low loss characteristics of glass or ceramics. It need not to ensure lossless microwave energy through and has good vacuum tightness. High power tube output window forced air cooling is commonly used to reduce due to the heat generated by the dielectric loss.




Should you're interested in our ck619 continuous wave cavity magnetron magnetron generator 10kw, welcome to check the quotation with us. We're one of the leading manufacturers of various microwave equipment, offering you the customized service. Don't hesitate any more.